How to Unclog a Rosun Garbage Disposal?

News Center

Rosun garbage disposal

Even if you are careful about what you put down your garbage disposal, clogs happen. There are some simple things you can do to keep clogs to a minimum and steps you can take when that inevitable clog occurs.

 

Flip through the owner’s manual to find out what your disposal’s limitations are.

 

Chapter One:

If the instructions in your user’s manual are no help, follow these steps to unclog a disposal:

 

1. Shut off the electrical power switch.

 

2. This switch is located under the cabinet, near the disposal, or on a wall nearby. If you don’t find a switch, go to the main power panel and turn off the breaker or remove the fuse that powers the disposal.

 

3. Never put your hand in the disposal. Remember that the switch may be defective, so keep your hands out of the disposal even when power to the machine is turned off.

 

4. Take a look in the disposal.

 

5. A flashlight may shed some light on the problem — you may see a large object caught in the disposal.

 

6. If an object caused the stoppage, use a pair of pliers to reach into the disposal and remove it.

 

7. Wait 15 minutes for the disposal motor to cool.

 

8. Turn on the power and push the reset or overload protector button.

 

Chapter Two:

If the disposal is still clogged, follow these steps:

 

1. Turn off the power and insert L-shaped hex wrench into the opening in the center of the disposal’s bottom, and turn the wrench back and forth until the impeller is freed.

 

2. When the impeller moves freely, wait 15 minutes for the motor to cool, turn on the power, and push the reset button and then try operating the disposal.

 

#Rosun garbage disposal

#max garbage disposal

#garbage disposal